Armored Attitude Adjuster

Chain shoe machined from Nylon 66
Active Plate and Back Support Plate investment cast with 4130 steel
28% finer teeth spacing (compared to 2001-06 chain adjusters) for more accurate adjustments
Chain adjustment method same as 2001-06 style stock ‘L’Bracket’ adjusters.

Benefits

Increase torque by 3.42 ft/lbs
Reduces primary noise
Helps prevent damage to primary
Improves motor bottom end and inner primary race bearing durability

2006-Later Dyna Models
2007-Later Softail/ Touring Models*

*Except 2018 Softail Street Bob and 2018 Softail Low Rider

The Armored Attitude Adjuster is an excellent solution for any non-racing application.

The Attitude Chain Adjuster solves the issues associated with the stock auto chain tensioner on 2006-Later Dyna & 2007-Later Softail/ Touring models. The first moment the chain has enough slack into it to ratchet the shoe up another notch, and thus tightening the chain, it will. One notch tighter might not be an issue, but you don’t have any control of when this mechanism stops tightening the chain. The end result in many cases is the primary chain is so tight that it will start wearing out left side motor case bearings, inner primary bearings, clutch hub bearings and transmission output gear bearings. Our manual chain tensioner allows you to adjust the chain to the proper 5/8-7/8″ (cold) freeplay, and never have to worry about the chain getting too tight. We offer this chain adjuster for fitment with stock outer primary covers.

Note: Check the primary chain tension at the 500-mile interval and then after every 5000 miles. If the chain cannot be adjusted properly, then replace the chain.

BAKER Attitude Adjuster Installation Instructions: Click Here

Download BAKER Attitude Adjuster Installation Instructions: Click Here

Armored Attitude Adjuster

The product images shown may represent the range of product, or be for illustration purposes only and may not be an exact representation of the product. The products attributes e.g. colour etc. vary with each unique part number. We recommend that customers unfamiliar with the products please do so accordingly.

VAT rules and rates

Customers are subject to Value Added Tax (VAT 21%). It is a consumption tax that applies to almost all goods and services bought and sold for use or consumption in the EU.

armored attitude adjuster baker drivetrain 7

Made in USA

Description

Stronger than the original for those with more abusive inclinations!

Prevent damage to your motorcycles left side motor case bearings, inner primary bearings, clutch hub bearings and transmission output gear bearings. If you have a 2006 or later Dyna, or a 2007 and later Softail/ Touring bike you know the issues that come along with the stock auto chain tensioner. At the first moment that the chain has any slack in it, the auto tensioner ratchets the shoe up another notch. Now one notch is not going to be an issue, but the tightening never stops and this causes several problems. Our manual chain tensioner allows you to set the chain to the proper 5/8”-7/8” (cold) freeplay, and never have to worry about it being too tight.

*The support kit to upgrade your original Attitude Adjuster to the new Armored Attitude Adjuster includes a support plate, hardware, shoe and a shoe keeper. PN 179-67-A.

BAKER Attitude Adjuster Installation Instructions: Click Here

$279.00