Menu
Your Cart

1984-2006 Harley Davidson Transmissions

Zero Offset Steel Pulley
Out of Stock
These pulleys are made from a solid chunk of steel and are 23% lighter than the stock cast iron piece. We recommend long life pulleys for performance ..
$199.00
By the mid-1980’s, Harley was using the belt drive secondaries in 100% of their Big Twins. The same 1-1/2” wide belt is still used today because it is..
$105.00
By the mid-1980’s, Harley was using the belt drive secondaries in 100% of their Big Twins. The same 1-1/2” wide belt is still used today because it is..
$159.00
Baker Drivetrain Shift Fork Kits include all three forks and are a direct replacement for the standard O.E. 5-speed forks but with much needed improve..
$279.00
Frankentranny : OD6 + Kicker Builder's Kit
Out of Stock
Mary Shelley published the novel ‘Frankenstein’ when she was 19 years old in 1818. Her brilliant story has withstood the test of time with many subseq..
$2,395.00
If you need to cap off the speedo sensor hole for whatever reason, you need this plug. Some other companies do this with a steel plate and a gasket, j..
$21.00
5-Speed Right Side Drive Complete
Out of Stock
Baker Drivetrain introduced RSD (Right Side Drive) in 2001 when the 240 tires came out as a solution to balance big tire customs, and it accomplished ..
$2,595.00
9-plate Street Performance Clutch
Out of Stock
The 9-plate clutch is the competitively priced smaller brother of the KKC. A must have for all 1990-93 Big Twins, and 1994-06 Big Twins with a 9 tooth..
$880.00
The stock ratchet pawl used from 1980 to 2000 utilized scissor spring that was well known for breaking. The unfortunate side effect of this failure is..
$189.00
Simple, sleek and clean show polished speedometer sensor keeps a stylish low profile to the transmission case. For those with an attention to detail, ..
$139.00
KKC: King Kong Clutch
Out of Stock
"Torque capacity of a clutch is dictated by the diameter and the number of clutch plates.”So the goal was to implement the biggest diameter clutch pla..
$1,495.00
Brake Pad Kit for Drive Brake Transmissions is a replacement kit for BAKER Drive Brake dual piston setup which utilizes Performance Machine internal c..
$77.00
The 34091-85 inner bearing race has been used on Big Twins since 1985. The inner primary bearing rides on this race. By design, this race press-fits o..
$50.00
Baker Drivetrain DD5 is not just a replacement for the stock 5-Speed. Whether you’re going down the drag strip or you’re cruising down the road, the t..
$2,495.00
People have been griping about the 37311-75 throwout bearing since it was introduced into Big Twins in 1975. Failures occur when the clutch cable is i..
$79.95
Showing 16 to 30 of 46 (4 Pages)
By entering this Site you acknowledge and agree that nothing contained on this Site shall be construed as granting rights, by license or otherwise, to any DVX LLC intellectual property rights, including but not limited to copyrights, patents and trademarks.
By using our website, you hereby consent to our Privacy Policy and agree to its Terms and Conditions.