Menu
Your Cart

mo.button

 mo.button motogadget 2
 mo.button motogadget 3
 mo.button motogadget 4
 mo.button motogadget 5
In simple facts:
a) normally, the operating current (e.g. headlight or turn signals) is transmitted directly via the wiring of the handlebar switches. Due to the high currents, cables with large cross-sections have to be routed from the fuse box to the switch and back to the electrical consumer.
The result: big cable bundles. Definitely, a 'no go' for custom bikes with restricted space or a concealed electrical system.

b) using the mo.unit without the mo.button, just a thin cable for each switch- or button-controlled feature has to be routed to the mo.unit. These cables only carry minimal control currents. All high loads and currents are switched directly at the mo.unit and transmitted directly to the electrical consumers. This already leads to a significant reduction and simplification of the wiring harness. 

c) using the mo.unit blue, basic or mo.unit v.2 in combination with the tiny mo.button, you will once again reduce the amount of cables that have to be routed! All switches/buttons on the handlebar are connected at the shortest distance possible and concealed inside the handlebar. Consequently, you will have to route only ONE thin cable from the mo.button to the mo.unit. All loads and currents will be switched directly at the mo.unit (see explanations above). A layout reduced to the max!

The mo.button is completely moulded in, making it water-tight and resistant to vibrations.
mo.button
The product images shown may represent the range of product, or be for illustration purposes only and may not be an exact representation of the product. The products attributes e.g. colour etc. vary with each unique part number. We recommend that customers unfamiliar with the products please do so accordingly.
VAT rules and rates
Customers are subject to Value Added Tax (VAT 21%). It is a consumption tax that applies to almost all goods and services bought and sold for use or consumption in the EU.
 mo.button motogadget 6
Made In Germany

Another innovation from motogadget: the mo.button.
It's a big help - in combination with the new mo.unit blue, basic and mo.unit v.2 - in reducing 'cable clutter' and simplifying wiring harnesses.
Integrated into the handlebar tube - or any other adequate location - this tiny cylinder will electrically connect all handlebar instruments, switches and buttons.
Using state-of-the-art bus technology, the mo.button digitally processes signals and transmits them to the mo.unit over a thin cable.
The electrical consumers will then be switched inside the mo.unit.
All control wires are moved into the handlebar. This saves space, weight, labour and time. A 'must have' for custom bikes with clean-look handlebars.

For Motogadget mo.unit blue Installation Instructions: Click here

Download Motogadget mo.unit blue Installation Instructions: Click here

$46.66
  • SKU: 4002032
  • MPN: 4002032
By entering this Site you acknowledge and agree that nothing contained on this Site shall be construed as granting rights, by license or otherwise, to any DVX LLC intellectual property rights, including but not limited to copyrights, patents and trademarks.
By using our website, you hereby consent to our Privacy Policy and agree to its Terms and Conditions.